Semester 1

Theory

Engineering Chemistry (100101) - 3 CreditsPYQs

3L + 0T + 0P0/10 topics done

Unit 1Atomic and Molecular Structure8 hrs0/5 topics doneAsk AI

Electromagnetic radiationsDual nature of electron and Heisenberg uncertainty Principle. Photoelectric effectPlanck's theory. Principles for the combination of atomic orbitals to form a molecular diagram of molecular orbitals. Bent's ruleVSEPR theory (typical example) co- ordination numbers and geometries. Isomerism in transition metal compounds. Metal CarbonylsSynthesis and Structure.

Unit 2Spectroscopy6 hrs0/1 topics doneAsk AI

Principle of rotational and vibrational spectroscopy, selection rule for application in diatomic molecules, elementary idea of electronic spectroscopy, UV-VIS spectroscopy with related to rules and its applications. Basic Principle of nuclear Magnetic resonance spectroscopy with applications.

Unit 3Electrochemistry and Fuels6 hrs0/1 topics doneAsk AI

Nernst equation, EMF and electrochemical cell, the introduction of corrosion, corrosion mechanism, types of corrosion, water line corrosion, stress corrosion, pitting corrosion, Lead acid storage cell, leclanche cell. Calorific value of fuels, proximate and ultimate analysis of coals, fuel cells, Bio fuels.

Unit 4Water Chemistry8 hrs0/1 topics doneAsk AI

Hardness of water, estimation of water hardness by EDTA and Alkalinity method. Removal of the hardness of water- soda lime process, zeolite process, Ion exchange process, Boiler problem, sludge, and scale formation, priming and foaming, Boiler corrosion, and Caustic embrittlement.

Unit 5Polymer and Plastics8 hrs0/1 topics doneAsk AI

Polymerization techniques (free radical, ionic, and co-ordination mechanism)Preparation properties, and technical application of phenol-formaldehyde resins, elastomers, synthetic rubbers (Buna-S, Buna-N, neoprene). Inorganic polymers, Silicones, adhesives, epoxy resins. the structural difference between thermoplastic and thermosetting Plastics, the Importance of commercially important thermoplastics and thermosets; Poly ethylene, Polyvinyl chloride, Polystyrene.

Unit 6Organic Reactions and Synthesis of A Drug Molecule6 hrs0/1 topics doneAsk AI

Introduction to intermediate and reaction involving Substitution, addition, elimination, oxidation-reduction. Diels Elder cyclization and epoxide ring opening reactions, synthesis of commonly used drug molecules like aspirin.

References

University Chemistry, B.H. Mahan,Pearson
Chemistry, principles and application, M.J. Sienko and R.A. Plane, McGraw Hill
International
Fundamentals of molecular Spectroscopy, C.N. Banwell , McGraw Hill
International
Engineering Chemistry (NPTEL Web- Book), B.L. Tembe, Kamaluddin and M.S.
Krishnan, NPTEL
Physical Chemistry, P.W. Atkins, Oxford University Press
A text book of engineering chemistry, S. Chawala, Dhanpat Rai Publication
General Chemistry Part 1, R. Sarkar, New Central Book agency

Engineering Mathematics–I (100102) - 4 CreditsPYQs

3L + 1T + 0P0/61 topics done

Unit 1Linear Algebra-I7 hrs0/14 topics doneAsk AI

Elementary Row operationsGauss -Jordan Method for finding the inverse of MatrixComplex Matrix : HermitianSkew Hermitian and Unitary MatrixVector spaceSub SpacesLinear dependence and Independences of VectorsLinear SpanBasisDimensionExtension of basis of subspaceThe rank of a matrixRow and column spaceSolvability of system of linear equations.

Unit 2Linear Algebra-II7 hrs0/11 topics doneAsk AI

Linear TransformationsKernel and Range of linear transformationMatrix Representation of a linear transformationRank-Nullity TheoremEigen Value and Eigen VectorsProperties of Eigen vectorsEigen BasesOrthogonal TransformationSimilarity TransformationMatrix DiagonalizationCayley- Hamilton Theorem.

Unit 3Calculus for single variable7 hrs0/10 topics doneAsk AI

Inderminate formL’Hospital RuleRolle’s TheoremMean Value TheoremExpansion of function (single variable)Taylor and Maclaurin SeriesRiemann IntegrationRiemann SumImproper IntegralsBeta and Gamma function and their properties.

Unit 4Multivariable Calculus (Differentiation)7 hrs0/7 topics doneAsk AI

Function with two or more variableLimitcontinuity and Partial differentiationTotal Differentiation Taylor’s series and Maclaurin’s series for function with two variableJacobianMaxima and MinimaMethod of Lagrange’s multiplier.

Unit 5Multivariable Calculus (Integration)7 hrs0/8 topics doneAsk AI

Double Integralchange of order of integrationTriple integralChange of Variable in a Double and Triple IntegralsChange to polar coordinateChange to cylindrical coordinateChange to spherical polar coordinateApplication to area and volume using double and triple integral

Unit 6Vector Calculus7 hrs0/11 topics doneAsk AI

Scalar and vector fieldsGradientDirectional derivativeDivergenceCurl and their propertiesLine integralGreen’s theorem in plane (without proof)Surface integralStoke’s theorem (without proof)Volume IntegralGauss-Divergence’ theorem (without proof).

References

AICTE’s Prescribed Textbook: Mathematics-I (Calculus & Linear Algebra), Reena
Garg, Khanna Book Publishing Co. ISBN-10 9391505171
Advanced Engineering Mathematics, Chandrika Prasad & Reena Garg, Khanna Book
Publishing Co., 2021. ISBN 10: 9386173522 / ISBN 13: 9789386173522.
Higher Engineering Mathematics, B.V. Ramana, Tata McGraw Hill New Delhi, 11th
Reprint, 2010,ISBN-10 007063419X ISBN-13978- 0070634190.
Advanced Engineering Mathematics, SrkIyengar Rk Jain,Narosa,5thEdition,ISBN-10
8184875606 ISBN-13978-8184875607
Advanced Engineering Mathematics, Erwin Kreyszig, 9th Edition, John Wiley &
Sons, 2006.

Communicative English (100103) - 3 CreditsPYQs

3L + 0T + 0P0/53 topics done

Unit 1Vocabulary Building7 hrs0/7 topics doneAsk AI

Nature of Word FormationRoot Word and MorphemePrefix and SuffixForeign Expressions in EnglishSynonym and AntonymHomophone and HomographAbbreviation and Acronym.

Unit 2Basic Writing Skills7 hrs0/11 topics doneAsk AI

Parts of Speech: Types of WordsStructures of SentenceKind of SentencePhrase and ClausePunctuation MarksCapitalizationTenses: PresentPast and FutureVoices: Active and PassiveFormation of Questions using Primary AuxiliariesModals and Wh-Words.

Unit 3Common Errors in English7 hrs0/8 topics doneAsk AI

ArticlesPrepositionsModifiersSubject-Verb AgreementNoun-Pronoun agreementRedundanciesClichesSpelling Error.

Unit 4Principles of Appropriate Writi7 hrs0/13 topics doneAsk AI

Defining: DescribingClassifying and ExemplifyingIntroductionBody, and ConclusionReferencesQuotations and IllustrationsOrganizing the Paragraphs in a Document7Cs of the Professional Writing: ClearConciseConcreteCorrectCoherentComplete and Courteous.

Unit 5Practices of Formal Writing7 hrs0/10 topics doneAsk AI

Formal Letter: Cover-Letter and ApplicationResume WritingReport WritingMinutes of MeetingMemorandumNoticeEssay Writing: Personal and ImpersonalEmail Writing EtiquettesArticle WritingWriting for Current Social Media.

Unit 6Comprehension of Written English7 hrs0/4 topics doneAsk AI

Of Studies (Essay) by Sir Francis BaconThe Sun Rising (Poem) by John DonneThe Last Leaf (Story) by O HenryUnseen/Untaught Passage.

References

English language and communication skills for engineers, Sanjay Kumar,Pushp lata,
Oxford university Press
Communicative English for Technical student, Dr. Bijay Bhadur Singh and Dr.
Kalpana Sinha, Foundation publishing House (FPM)
Oxford University Press
A course in Listening & Speaking, V. Sasi Kumar ,P. Kiranmai Dutt and Geetha
Rajeevan, Foundation Books

Engineering Graphics and Design (100104) - 1 CreditsPYQs

1L + 0T + 0P0/30 topics done

Unit 1Introduction to Engineering Drawing7 hrs0/9 topics doneAsk AI

Principles of Engineering Graphics and Their SignificanceUsage of Drawing InstrumentsLetteringConic Sections including the Rectangular Hyperbola (General Method Only)CycloidEpicycloidHypocycloid and InvoluteScales PlainDiagonal and Vernier Scales

Unit 2Orthographic Projections7 hrs0/1 topics doneAsk AI

Principles of Orthographic Projections - Conventions -Projections of Points and Lines Inclined to Both Planes; Projections of Planes Inclined Planes Auxiliary Planes.

Unit 3Projections of Regular Solids7 hrs0/4 topics doneAsk AI

Types of SolidsProjects of Solids (Prism, pyramids, cone, and cylinder): Inclined to Both the Planes- Auxiliary ViewsDraw Simple AnnotationDimensioning and Scale.

Unit 4Sections and Sectional Views of Right Angular Solids7 hrs0/7 topics doneAsk AI

Section of Solids (Prism, Cylinder, Pyramid, Cone)Auxiliary ViewsDevelopment of Surfaces Of Right Regular Solids- PrismPyramidCylinder And ConeDraw The Sectional Orthographic Views of Geometrical SolidsObjects From Industry And Dwellings (Foundation To Slab Only).

Unit 5Isometric Projections7 hrs0/8 topics doneAsk AI

Isometric ViewsCompound SolidsPrinciples of Isometric Projection Isometric ScaleConventionsIsometric Views of LinesPlanesSimple and Conversion of Isometric Views toOrthographic Views And Vice-VersaConventions.

Unit 6Overview of Computer Graphics7 hrs0/1 topics doneAsk AI

Listing the Computer Technologies that Impact on Graphical Communication, Demonstrating Knowledge of the Theory of CAD Software [Such As: The Menu System, Toolbars (Standard, Object Properties, Draw, Modify And Dimension), Drawing Area (Background, Crosshairs, Coordinate System), Dialog Boxes And Windows, Shortcut Menus (Button Bars), The Command Line (Where Applicable), The Status Bar, Different Methods of Zoom as Used in CAD, Select and Erase Objects.; Isometric Views of Lines, Planes, Simple And Compound Solids.

References

Engineering Drawing, N.D. Bhatt, Charotar Publishing House, 53rd Edition, ISBN:
978-9380358277
A Textbook of Engineering Drawing, R.K. Dhawan, S. Chand Publishing, Revised
Edition, ISBN: 978-8121929571
Engineering Drawing and Graphics, K. Venugopal, V. Prabhu Raja, New Age
International Publishers, 3rd Edition, ISBN: 978-8122430120
Engineering Graphics with AutoCAD, D.M. Kulkarni, A.P. Rastogi, A.K. Sarkar, PHI
Learning Pvt. Ltd., 1stEdition, ISBN: 978-8120337834

Basic Electrical Engineering (100106) - 3 CreditsPYQs

3L + 0T + 0P0/11 topics done

Unit 18 hrs0/1 topics doneAsk AI

DC Circuit Analysis and Network Theorems: Concepts of Network, Active and Passive elements, voltage and current sources, concept of linearity and linear network, unilateral and bilateral elements. R L and C as linear elements. Source Transformation. Kirchhoff’s Law, loop and nodal methods of analysis; star – delta transformation; Network Theorems: Superposition Theorem, Thevenin’s Theorem, Norton’s Theorem, Maximum Power Transfer Theorem. (Simple Numerical Problems)

Unit 25 hrs0/6 topics doneAsk AI

Magnetic Circuit: Magnetic circuit conceptsanalogy between Electric & Magnetic circuitsMagnetic circuits with DC and AC excitationMagnetic leakage. B-H curveHysteresis and Eddy Current lossesMagnetic circuit calculations.

Unit 38 hrs0/1 topics doneAsk AI

Steady State Analysis of Single-Phase AC Circuits: Sinusoidal, Square and Triangular waveforms–average and effective values, form and peak factors, concept of phasors, phasor representation of sinusoidally varying voltage and current. Analysis of series, parallel, and series – parallel RLC Circuits: Apparent, Active & Reactive Powers, Power factor, causes and problems of low power factor, power factor improvement. Resonance in Series and Parallel Circuits. (Simple Numerical Problems)

Unit 45 hrs0/1 topics doneAsk AI

Three Phase AC Circuits: Three Phase System – its necessity and advantages, meaning of phase sequence and star and delta connections, balanced supply and balanced load, line and phase voltage/ current relations, three phase power and its measurement. (Simple Numerical Problems)

Unit 510 hrs0/1 topics doneAsk AI

Introduction to DC Machines:Principal, Operation, Construction, and types of DC machines, e.m.f. equation of generator and torque equation of motor. Single Phase Transformer: Principle of Operation, Construction, e.m.f. equation, losses in transformer, efficiency. Three Phase Induction Motor:Principal, Operation, and Construction (Simple Numerical Problems)

Unit 66 hrs0/1 topics doneAsk AI

Soldering- Soldering and desoldering techniques, breadboard wiring, general-purpose PCB soldering/wiring. Wiring-Types of residential and commercial wiring systems, general rules and guidelines for installation, loadcalculation and sizing of wire, rating of main switch, distribution board.

References

Basic Electrical Engineering, D.P. Kothari et al,McGraw-Hill Education 4th
Edition,2019
Electrical and Electronic Technology Edward Hughes, 12th edition, 2016
Principles Electrical Engineering and Electronics, V.K Mehata, Rohit Mehta, S Chand
and Company 2nd edition, 2015
Basic Electrical Engineering, J. B. Gupta, Katson Publication
A textbook of Electrical Technology B. L. Thereja, A. K. Thereja Vol. 1, 2, and 3 S
Chand Publication

Practical

Sports/Yoga/NCC/NSS (100109P) - 1 Credits

0L + 0T + 2P0/6 topics done

Course Objectives: (a) Encouraging creativity and innovation: The course could aim to foster a culture of creativity and innovation among engineering students. It could provide opportunities for students to generate and develop new ideas, think critically, and come up with innovative solutions to real-worldproblems. This objective could be achieved through brainstorming sessions, design thinking exercises, and hands-on projects. (b) Enhancing problem-solving skills: The course could focus on enhancing the problem- solving skills of engineering students. It could provide training on various problem-solving techniques, such as root cause analysis, critical thinking, and decision-making. Students may learn how to identify and analyse complex problems, develop feasible solutions, and implement them effectively. (c) Developing project management skills: The course could aim to develop project management skills among engineering students. It could cover topics such as project planning, scheduling, budgeting, and risk management. Students may learn how to manage resources, communicate effectively, and work collaboratively in a project-based environment. (d) Promoting interdisciplinary collaboration: The course could encourage interdisciplinary collaboration among engineering students. It could provide opportunities for students from different engineering disciplines to work together on innovative projects. This could foster cross-disciplinary learning, encourage diverse perspectives, and promote teamwork and collaboration skills. (e) Facilitating practical application of engineering concepts: The course could focus on the practical application of engineering concepts and principles. It could provide students with opportunities to apply their theoretical knowledge to real-world projects, prototypes, or simulations. Students may learn how to translate engineering theories into practical solutions and develop hands-on experience in implementing innovative projects. Pre-requisite: Nil Course Outcome:1. Developed innovative projects: Students may have successfully developed innovative projects that demonstrate their creativity, problem-solving skills, and technical competence. These projects could be prototypes, models, simulations, or practical solutions to real-world problems, showcasing their ability to apply engineering concepts in a creative and innovative manner.2. Improved critical thinking and problem-solving skills: Students may have honed their critical thinking and problem-solving skills through various course activities, such as brainstorming, design thinking, and project development. They may have learned to analyse complex problems, identify viable solutions, and make informed decisions based on technical, economic, and social considerations.3. Enhanced project management and teamwork skills: Students may have gained practical experience in managing projects, including planning, scheduling, budgeting, and risk management. They may have learned how to work effectively in a team, collaborate with diverse team members, and communicate project progress and results professionally.4. Increased interdisciplinary knowledge and collaboration: Students may have gained exposure to interdisciplinary concepts and collaborated with peers from different engineering disciplines. They may have learned to appreciate diverse perspectives, leverage interdisciplinary knowledge, and work collaboratively to develop innovative solutions that integrate multiple domains of engineering.5. Cultivated a mindset of innovation and entrepreneurship: Students may have developed a mindset of innovation and entrepreneurship, recognizing the importance of creativity, adaptability, and continuous improvement in engineering practice. They may have learned to identify opportunities, think critically, and take risks to develop and implement innovative projects with commercial or societal potential. List of Reports: Any topics related to innovative project.

Engineering Chemistry Lab (100101P) - 1 Credits

0L + 0T + 2P0/15 topics done

Perform any 10 Experiments1. To estimate hardness of water by alkalinity method2. To estimate hardness of water by EDTA method3. To remove hardness of water by ion exchange method4. Determination of pH of a given acid solution using a standard sodium hydroxide solution5. Determination of surface tension and viscosity6. Chemical analysis of salt (Acid radical and basic radical)7. Adsorption of acetic acid by charcoal8. Test of adulteration of fat butter, sugar, turmeric powder, chilli powder and pepper9. Saponification/ acid value of an oil10. Identification of organic substances and their functional groups11. Potentiometric determination of redox potentials and emf12. Synthesis of drug/ polymer like ASPRIN/ Urea- formaldehyde resin13. Thin layer chromatography14. Analysis of flue gas by orsat apparatus

Communicative English Lab (100103P) - 1 Credits

0L + 0T + 2P0/26 topics done

Perform any 10 Experiments Introduction: Language Lab of English includes Listening ComprehensionReading ComprehensionSpeaking Skills: PhoneticsInternational Phonetic Alphabet Symbols (IPAS)Sounds: Vowels and ConsonantsPronunciationIntonationStress and RhythmJust A Minute Technique (JAM)Communication: Verbal and Non-VerbalEthical Usage of Artificial IntelligenceSelf-Introduction: SocialAcademic and ProfessionalInterview: Brainstorming Vocabulary Activities.1. Listening Comprehension and Speed (Software)2. Reading Comprehension and Speed (Software)3. Pronunciation: Learning and Test (Software)4. Self-Introduction: Social, Academic and Professional5. English Typing: Microsoft Word Document (MS Word), and Microsoft Power Point Presentation (PPT)6. Oral Presentation7. Interview: Online and Offline8. Just A Minute Technique (JAM) and Extempore9. Debate10. Group Discussion11. Activities: Role Play, Peer Activities, and Group Activities12. Anchoring and Addressing: an Assembly, a Meeting, a Seminar, a Party

Engineering Graphics and Design Lab (100104P) - 2 Credits

0L + 0T + 4P0/15 topics done

Perform any 10 Experiments1. (Which includes dimensioning methods, different types of line, construction of different polygon, divide the line and angle in parts, use of stencil)2. Construction of Plane, Diagonal & Vernier Scales.3. Construction of Ellipses, Parabolas, and Hyperbolas using the general method.4. Construction of cycloid, epicycloid, hypocycloid, and involute of a circle.5. Projection of Points and Lines inclined to both planes.6. Projections of Planes (e.g., rectangular, triangular) in inclined positions.7. Projection of Solids (prisms,pyramids, cones, and cylinders)8. Drawing of Sections of PrismsCylindersPyramids, and Cones.9. Development of Surfaces for prisms, pyramids, cylinders, and cones.10. Construction of Isometric views of lines, planes, and simple solids.11. Introduction to CAD Software.12. Use of CAD software to draw basic geometric shapes, apply dimensions, and modify objects.

Basic Electrical Engineering Lab (100106P) - 1 Credits

0L + 0T + 2P0/11 topics done

Perform all 10 Experiments1. Verification of Kirchhoff’s laws.2. Verification of Superposition Theorem.3. Verification of Thevenin’s Theorem.4. Verification of Norton’s Theorem.5. Verification of Maximum Power Transfer Theorem.6. Measurement of power in 3 – Ø circuit by Two Watt meter method and determination of its power factor.7. Star to Delta and Delta to Star conversion of the three circuit.8. Determination of Efficiency by load test of a 1 – Ø Transformer.9. To study the typical BHK house wiring10. Study of safety precautions while working on electrical installations and necessity of earthing

Semester 1

Theory

Practical

Ask AI

Support BEUConnect

Send feedback