Semester 1

Theory

Engineering Physics (100110) - 3 CreditsPYQs

3L + 0T + 0P0/69 topics done

Unit 10/5 topics doneAsk AI

1. Frame of Reference: 2 hrs Non-Inertial frame of reference, rotating coordinate system, centripetal and Coriolis acceleration and its application in weather system.2. Oscillations: 3 hrs Harmonic OscillatorDamped Harmonic motion – overdampedcritically Damped and lightly damped oscillatorsForce Oscillators and Resonance.

Unit 20/13 topics doneAsk AI

1. Optics: 4 hrs Huygens’s PrincipleSuperposition of Waves and interference of Light by wave front- splitting and amplitude-splittingYoung’s double slit experimentMichelson interferometerFraunhofer diffraction from single slit and circular apertureDiffraction Grating and their resolving power2. LASER: 4 hrs Einstein’s theory of matter-radiations interactionEinstein’s Coefficients (A and B)Amplification by population inversionDifferent types of lasers – Gas LaserHelium-Neon LaserSolid State Laser (Ruby, Neodymium)Semiconductor Laser.

Unit 30/12 topics doneAsk AI

1. Quantum Mechanics: 5 hrs Compton EffectPhotoelectric EffectWave Particle dualityde Broglie’s hypothesisHeisenberg’s Uncertainty PrincipleWave function and wave packetsphase and group velocitiesSchrodinger’s Wave EquationNormalizationExpectation valuesEigenvalues and Eigenfunction.2. Applications in One dimensions: 2 hrs Application of Schrodinger Wave Equation for particle in one dimensional box – its wavefunction and eigenvalue of energy and momentum.

Unit 40/15 topics doneAsk AI

1. Vector Calculus: 2 hrs GradientDivergence and CurlLineSurface and Volume integralsGauss’s Divergence theorem and Stokes’ theorem in Cartesian Coordinate.2. Electrostatics: 4 hrs Gauss’s Law and its applicationsDivergence and Curl of Electrostatic fieldsElectrostatic PotentialBoundary ConditionsPoisson’s and Laplace’s equationsDielectricsPolarizationBound ChargesElectric displacementBoundary Conditions in dielectrics.

Unit 50/19 topics doneAsk AI

1. Magnetostatics: 4 hrs Lorentz forceBiot-Savart and Ampere’s circuital laws and their applicationsDivergence and Curl of Magneto static fieldsMagnetic vector potentialForce and torque on a magnetic dipoleMagnetic MaterialsMagnetizationBound currentsBoundary conditions.2. Electrodynamics and Electromagnetic Waves: 4 hrs Ohm’s lawMotional EMFFaraday’s LawLenz’s lawSelf and mutual inductanceEnergy stored in magnetic fieldMaxwell’s equations in vacuum and nonconducting mediumContinuity EquationPoynting TheoremWave Equations: plain electromagnetic wave in vacuum and their transverse nature and Polarization.

Unit 60/5 topics doneAsk AI

1. Introduction to Solids and Semi-Conductors: 3 hrs Free electron theory of metalfermi levelBloch’s theorem for particle in a periodic PotentialKroning-Penney model and origin of energy band.2. Electronic Materials: 3 hrs Metals, semiconductors and insulators, intrinsic and extrinsic semiconductors,Carriertransport, diffusion and drift, P-N junction.

References

Quantum Physics of Atoms, Molecules, Solids, Nuclei and Particles, R. Eisberg R.
Resnick, Wiley India Pvt. Ltd ISBN 978-81-265-0818-1
Theory of Vibration with Application, W.T. Thomson M. D. Dahleh, Pearson India
ISBN 978-81-317-0482-0
Introduction to Electrodynamics, D.J. Griffiths, Pearson India, ISBN 978-93-325-
5044-5
Electromagnetism, I.S. Grant, W. R. Phillips, Wiley India Pvt. Ltd ISBN 978-04-
719-2712-9
The Feynman Lectures on Physics, R.P. Feynman R. B. Leighton, Pearson India
ISBN 978-00-710-7458-2
Optics, Ajay Ghatak ,McGraw Hill ISBN 978-93-901-1359-0
Physics of Vibration and Waves, H. J. Pain, Wiley India Pvt. Ltd, ISBN 978-04-700-
1296-3
Concept of Modern Physics, Arthur Beiser, McGraw Hill ISBN 978-93-513-4185-7
Introduction to Solid State Physics, C. Kittle , Wiley India Pvt. Ltd, ISBN 978-81-
265-7843-6

Engineering Mathematics–I (100102) - 4 CreditsPYQs

3L + 1T + 0P0/61 topics done

Unit 1Linear Algebra-I7 hrs0/14 topics doneAsk AI

Elementary Row operationsGauss -Jordan Method for finding the inverse of MatrixComplex Matrix : HermitianSkew Hermitian and Unitary MatrixVector spaceSub SpacesLinear dependence and Independences of VectorsLinear SpanBasisDimensionExtension of basis of subspaceThe rank of a matrixRow and column spaceSolvability of system of linear equations.

Unit 2Linear Algebra-II7 hrs0/11 topics doneAsk AI

Linear TransformationsKernel and Range of linear transformationMatrix Representation of a linear transformationRank-Nullity TheoremEigen Value and Eigen VectorsProperties of Eigen vectorsEigen BasesOrthogonal TransformationSimilarity TransformationMatrix DiagonalizationCayley- Hamilton Theorem.

Unit 3Calculus for single variable7 hrs0/10 topics doneAsk AI

Inderminate formL’Hospital RuleRolle’s TheoremMean Value TheoremExpansion of function (single variable)Taylor and Maclaurin SeriesRiemann IntegrationRiemann SumImproper IntegralsBeta and Gamma function and their properties.

Unit 4Multivariable Calculus (Differentiation)7 hrs0/7 topics doneAsk AI

Function with two or more variableLimitcontinuity and Partial differentiationTotal Differentiation Taylor’s series and Maclaurin’s series for function with two variableJacobianMaxima and MinimaMethod of Lagrange’s multiplier.

Unit 5Multivariable Calculus (Integration)7 hrs0/8 topics doneAsk AI

Double Integralchange of order of integrationTriple integralChange of Variable in a Double and Triple IntegralsChange to polar coordinateChange to cylindrical coordinateChange to spherical polar coordinateApplication to area and volume using double and triple integral

Unit 6Vector Calculus7 hrs0/11 topics doneAsk AI

Scalar and vector fieldsGradientDirectional derivativeDivergenceCurl and their propertiesLine integralGreen’s theorem in plane (without proof)Surface integralStoke’s theorem (without proof)Volume IntegralGauss-Divergence’ theorem (without proof).

References

AICTE’s Prescribed Textbook: Mathematics-I (Calculus & Linear Algebra),
ReenaGarg, Khanna Book Publishing Co. ISBN-10 9391505171
Advanced Engineering Mathematics, Chandrika Prasad &ReenaGarg, Khanna Book
Publishing Co., 2021. ISBN 10: 9386173522 / ISBN 13: 9789386173522.
Higher Engineering Mathematics, B.V. Ramana, Tata McGraw Hill New Delhi,
11th Reprint, 2010,ISBN-10 007063419X ISBN-13978- 0070634190.
Advanced Engineering Mathematics, SrkIyengarRk Jain,Narosa,5thEdition,ISBN-10
8184875606I
SBN-13978-8184875607
Advanced Engineering Mathematics, Erwin Kreyszig, 9th Edition, John Wiley &
Sons, 2006.

Programming for Problem Solving (100111) - 3 CreditsPYQs

3L + 0T + 0P0/9 topics done

Unit 1Introduction to Programming6 hrs0/1 topics doneAsk AI

Introduction to components of a computer system (disks, memory, processor, where a program is stored and executed, operating system, compilers etc.). Idea of Algorithm: steps to solve logical and numerical problems. Representation of Algorithm: Flowchart/ Pseudo code with examples. From algorithms to programs; source code, variables (with data types) variables and memory locations, Syntax and Logical Errors in compilation, object and executable code.

Unit 2Operators, Conditional Branching and Loops8 hrs0/1 topics doneAsk AI

Arithmetic expressions/arithmetic operators, relational operators, logical operators, bitwise operators and precedence.Writing and evaluation of conditionals and consequent branching, Iteration and loops.

Unit 3Arrays and String6 hrs0/1 topics doneAsk AI

Array declaration & initialization, bound checking arrays (1-d, 2-d), character arrays and strings.

Unit 4Function, Recursion and Pointers9 hrs0/1 topics doneAsk AI

Functions (including using built in libraries), Parameter passing in functions, call by value, passing arrays to functions: Recursion, as a different way of solving problems. Example programs, such as Finding Factorial, Fibonacci series, Ackerman function etc. Idea of pointers, Defining pointers, Use of Pointers in self- referential structures, idea of call by reference.

Unit 5User defined Data Types and File handling8 hrs0/1 topics doneAsk AI

Structure- defining, declaring, initializing; accessing structure members, processing of structure, array of structures, structures within structure, structure and function, type definition; Union— definition, declaration, accessing union members, initializing union. Introduction, file declaration, opening and closing a file, working with text and binary files, I/O operations on file, error handling, random access to files

Unit 6Basic Algorithms5 hrs0/4 topics doneAsk AI

SearchingBasic Sorting Algorithms (Bubble, Insertion and Selection)Finding roots of equationsnotion of order of complexity through example programs (no formal definition required)

References

Programming in ANSI C 4th Ed,EBalagurusamy, McGraw Hill Education India
Private Limited, ISBN-978-9339219666, 7th Edition
The C Programming Language 2e,W. Kernighan / Dennis Ritchie,Pearson Education
India, 978-9332549449, 2nd Edition
Computer Fundamentals and Programming in C,ReemaThareja,Oxford University
Press, ISBN- 978-9354977893, 3rd Edition

IT Workshop (100113) - 2 CreditsPYQs

2L + 0T + 0P0/64 topics done

Unit 1PC HARDWARE(6 lectures)0/1 topics doneAsk AI

Identification of the peripherals of a computer, components in a CPU and its functions. Block diagram of the CPU along with the configuration of each peripheral. Functions of Motherboard. Assembling and Disassembling of PC. Installation of OS. Basic Linux commands

Unit 20/10 topics doneAsk AI

INTERNET(4 lectures) Web BrowsersAccess of websitesSurfing the WebSearch EnginesCustomization of web browsersproxy settingsbookmarkssearch toolbarspop-up blockers.Antivirus typesProtection from various threats

Unit 30/13 topics doneAsk AI

MICROSOFT WORD(4 lectures) Overview of MS word features. Usage of HyperlinkSymbolsSpell CheckTrack Changes. Table of ContentNewspaper columnsImages from files and clipartDrawing toolbar and Word ArtFormatting ImagesTextboxesParagraphs and Mail Merge in word. Using Word to create Project CertificateProject AbstractNews LetterResume

Unit 4LaTeX(6 lectures) Word Orientation0/29 topics doneAsk AI

Overview of LaTeX and tool word: Importance of LaTeX and MS office or equivalent (FOSS) tool Word as word ProcessorsDetails of the four tasks and features that would be covered in eachUsing LaTeX and word – Accessingoverview of toolbarssaving filesUsing help and resourcesrulersformat painter in word. Using LaTeX and Word to create a project certificate. Features to be covered:- Formatting Fonts in wordDrop Cap in wordApplying Text effectsUsing Character SpacingBorders and ColorsInserting Header and FooterUsing Date and Time option in both LaTeX. Creating project abstract Features to be covered:-Formatting StylesInserting tableBullets and NumberingChanging Text DirectionCell alignmentFootnoteHyperlinkSymbolsSpell CheckTrack Changes. Creating a Newsletter: Features to be covered:- Table of ContentNewspaper columnsImages from files and clipartDrawing toolbar and Word ArtFormatting ImagesTextboxesParagraphs and Mail Merge in word

Unit 50/6 topics doneAsk AI

MICROSOFT EXCEL( 4 lectures) Overview of Excel Features Excel formulae & Functionsconditional formattingChartsHyper linkingRenaming and Inserting worksheetsData Analysis functions. Creating a Scheduler (Features: - Gridlines, Format Cells, Summation, auto fill, Formatting) Calculating GPA (Features: - Cell Referencing, Formulae and functions in excel

Unit 60/5 topics doneAsk AI

MICROSOFT POWER POINT( 4 lectures) Overview of PowerPoint featuresInsertion of imagesslide transitionCustom animationHyperlinks

References

The Complete Computer upgrade and repair book, Cheryl A Schmidt, 3rd edition,
WILEY Dream tech
Introduction to Information Technology, ITL Education Solutions limited,
Pearson Education.
PC Hardware – A, Handbook – Kate J., Chase PHI
LaTeX Beginner's Guide, Stefan Kottwitz, Packt Publishing

Basic Electrical Engineering (100106) - 3 CreditsPYQs

3L + 0T + 0P0/11 topics done

Unit 18 hrs0/1 topics doneAsk AI

DC Circuit Analysis and Network Theorems: Concepts of Network, Active and Passive elements, voltage and current sources, concept of linearity and linear network, unilateral and bilateral elements. R L and C as linear elements.Source Transformation. Kirchhoff’s Law, loop and nodal methods of analysis; star – delta transformation; Network Theorems: Superposition Theorem, Thevenin’s Theorem, Norton’s Theorem, Maximum Power Transfer Theorem. (Simple Numerical Problems)

Unit 25 hrs0/6 topics doneAsk AI

Magnetic Circuit: Magnetic circuit conceptsanalogy between Electric & Magnetic circuitsMagnetic circuits with DC and AC excitationMagnetic leakage. B-H curveHysteresis and Eddy Current lossesMagnetic circuit calculations.

Unit 38 hrs0/1 topics doneAsk AI

Steady State Analysis of Single-Phase AC Circuits: Sinusoidal, Square and Triangular waveforms–average and effective values, form and peak factors, concept of phasors, phasor representation of sinusoidally varying voltage and current. Analysis of series, parallel, and series – parallel RLC Circuits: Apparent, Active & Reactive Powers, Power factor, causes and problems of low power factor, power factor improvement. Resonance in Series and Parallel Circuits. (Simple Numerical Problems)

Unit 45 hrs0/1 topics doneAsk AI

Three Phase AC Circuits: Three Phase System – its necessity and advantages, meaning of phase sequence and star and delta connections, balanced supply and balanced load, line and phase voltage/ current relations, three phase power and its measurement. (Simple Numerical Problems)

Unit 510 hrs0/1 topics doneAsk AI

Introduction to DC Machines:Principal, Operation, Construction, and types of DC machines, e.m.f. equation of generator and torque equation of motor. Single Phase Transformer: Principle of Operation, Construction, e.m.f. equation, losses in transformer, efficiency. Three Phase Induction Motor:Principal, Operation, and Construction (Simple Numerical Problems)

Unit 66 hrs0/1 topics doneAsk AI

Soldering- Soldering and desoldering techniques, breadboard wiring, general-purpose PCB soldering/wiring. Wiring-Types of residential and commercial wiring systems, general rules and guidelines for installation, loadcalculation and sizing of wire, rating of main switch, distribution board.

References

Basic Electrical Engineering, D.P. Kothari et al,McGraw-Hill Education 4th
Edition,2019
Electrical and Electronic Technology Edward Hughes, 12th edition, 2016
Principles Electrical Engineering and Electronics, V.K Mehata, Rohit Mehta, S
Chand and Company 2nd edition, 2015
Basic Electrical Engineering, J. B. Gupta, Katson Publication
A textbook of Electrical Technology B. L. Thereja, A. K. Thereja Vol. 1, 2, and 3 S
Chand Publication

Practical

Swatch Bharat Mission (100115P) - 1 Credits

0L + 0T + 2P0/15 topics done

Objectives:1. Understanding the importance of cleanliness and sanitation: The course could aim to create awareness about the significance of cleanliness and sanitation in maintaining personal health, environmental sustainability, and community well-being. It could cover topics such as waste management, sanitation practices, and the impact of poor sanitation on public health.2. Developing skills for effective waste management: The course could provide training on various waste management techniques, such as waste segregation, composting, recycling, and proper disposal of hazardous waste. It could also emphasize the importance of reducing waste generation and promoting sustainable waste management practices.3. Promoting behavioural change towards cleanliness: The course could focus on influencing positivebehavioural change among individuals and communities towards cleanliness. It could include modules on promoting good hygiene practices, creating awareness about the harmful effects of littering and open defecation, and encouraging responsible waste disposal habits.4. Creating awareness about Swachh Bharat Mission initiatives: The course could provide information about the Swachh Bharat Mission initiatives and campaigns launched by the Government of India to promote cleanliness and sanitation, such as SwachhSurvekshan, Swachh Bharat Abhiyan, and Clean India Campaign. It could also discuss the progress made, challenges faced, and future prospects of the Swachh Bharat Mission.5. Engaging in community participation and advocacy: The course could emphasize the importance of community participation in the Swachh Bharat Mission and provide tools and strategies for engaging with local communities to promote cleanliness and sanitation. It could also encourage advocacy for policy changes and innovations to address sanitation-related issues at the community, regional, and national levels.6. Pre-requisite: Nil7. Course Outcome:8. Increased awareness and knowledge about cleanliness and sanitation: Participants of the course may gain a deeper understanding of the importance of cleanliness and sanitation, including the impact on personal health, environmental sustainability, and community well- being. They may learn about various waste management techniques, hygiene practices, and the initiatives of the Swachh Bharat Mission.9. Enhanced skills for effective waste management: Participants may acquire practical skills related to waste management, such as waste segregation, composting, recycling, and proper disposal of hazardous waste. They may also develop skills in reducing waste generation and promoting sustainable waste management practices in their communities or workplaces.10. Positive behavioral change towards cleanliness: The course may influence participants to adopt positive behavioral changes towards cleanliness, such as avoiding littering, practicing good hygiene habits, and promoting responsible waste disposal. Participants may develop a sense of responsibility towards maintaining cleanliness in their surroundings and actively contribute towards creating a cleaner environment.11. Increased community participation and advocacy: Participants may become actively engaged in community participation and advocacy efforts related to cleanliness and sanitation. They may collaborate with local communities, government bodies, and non- governmental organizations (NGOs) to raise awareness, implement cleanliness initiatives, and advocate for policy changes or innovations to address sanitation-related issues.12. Contribution towards Swachh Bharat Mission objectives: Participants may contribute towards the objectives of the Swachh Bharat Mission, such as promoting cleanliness, ensuring proper waste management, and eliminating open defecation. They may actively participate in Swachh Bharat Mission campaigns, initiatives, and activities, and make a positive impact on their communities and society at large.13. List of Reports:14. Any topics related to Swatch Bharat Mission

Engineering Physics Lab (100110P) - 1 Credits

0L + 0T + 2P0/13 topics done

Perform any 10 Experiments1. Determination of the capacitance and permittivity of the given material.2. Determination of e/m of electron.3. Determination of Planck’s constant and Photoelectric Work Function using Photoelectric cell.4. Verification of inverse square law using photocell.5. Determination of Wavelength of (He-Ne) LASER using Diffraction Grating Method.6. Calculation of Energy Band Gap of a semiconductor.7. Determination of Dielectric constant using resonance method.8. Determination of Wavelength of Sodium light by measuring the diameter of the Newton’s Ring.9. Determination of curvature of convex surface of a lens by Newton’s ring.10. Verification of existence of Bohr’s Energy level with Frank-Hertz apparatus.11. Determination of the Earth’s horizontal magnetic field intensity and magnetic Moment of a magnet by employing magnetometer.12. Verification of Faraday’s Law and Lenz’s Law of Electromagnetic Induction.

Programming for Problem Solving Lab (100111P) - 1 Credits

0L + 0T + 2P0/12 topics done

Perform any 10 Experiments1. Tutorial 1: Problem solving using computers: Lab1: Familiarization with programming environment2. Tutorial 2: Variable types and type conversions: Lab 2: Simple computational problems using arithmetic expressions3. Tutorial 3: Branching and logical expressions: Lab 3: Problems involving if-then-else structures4. Tutorial 4: Loops, while and for loops: Lab 4: Iterative problems e.g., sum of series5. Tutorial 5: 1D Arrays: searching, sorting: Lab 5: 1D Array manipulation6. Tutorial 6: 2D arrays and Strings Lab 6: Matrix problems, String operations7. Tutorial 7: Functions, call by value: Lab 7: Simple functions8. Tutorial 8 &9: Numerical methods (Root finding, numerical differentiation, numerical integration): Lab 8 and 9: Programming for solving Numerical methods problems9. Tutorial 10: Recursion, structure of recursive calls Lab 10: Recursive functions10. Tutorial 11: Pointers, structures and dynamic memory allocation Lab 11: Pointers and structures11. Tutorial 12: File handling: Lab 12: File operations

IT Workshop Lab (100113P) - 1 Credits

0L + 0T + 2P0/71 topics done

Unit 1PC Hardware Task 10/1 topics doneAsk AI

Identify the peripherals of a computer, components in a CPU and its functions. Different types of printer. Task 2: Every student should disassemble and assemble the PC back to working condition. Lab instructors should verify the work and follow it up with a Viva. Also students need to go through the video which shows the process of assembling a PC. A video would be given as part of the course content

Unit 2Task 10/1 topics doneAsk AI

Every student should individually install MS windows on the personal computer. Lab instructor should verify the installation and follow it up with a Viva. Task 2: Every student should install Linux on the computer. This computer should have windows installed. The system should be configured as dual boot with both Windows and Linux. Lab instructors should verify the installation and follow it up with a Viva. Task 3: Different commands of DOS and Linux

Unit 3Internet& World Wide Web Task10/1 topics doneAsk AI

Orientation & Connectivity Boot Camp: Students should get connected to their Local Area Network and access the Internet. In the process they configure the TCP/IP setting. Finally students should demonstrate, to the instructor, how to access the websites and email. If there is no internet connectivity preparations need to be made by the instructors to simulate the WWW on the LAN. Task 2: Web Browsers, Surfing the Web: Students customize their web browsers with the LAN proxy settings, bookmarks, search toolbars and pop up blockers. Also, plug-ins like Macromedia Flash and JRE for applets should be configured. Task 3: Search Engines & Netiquette: Students should know what search engines are and how to use the search engines. A few topics would be given to the students for which they need to search on Google. This should be demonstrated to the instructors by the student. Task 4: Cyber Hygiene: Students would be exposed to the various threats on the internet and would be asked to configure their computer to be safe on the internet. They need to customize their browsers to block pop ups, block active x downloads to avoid viruses and/or worms

Unit 4LaTeX Task 10/29 topics doneAsk AI

Word Orientation: The mentor needs to give an overview of LaTeX and tool word: Importance of LaTeX and MS office or equivalent (FOSS) tool Word as word ProcessorsDetails of the four tasks and features that would be covered in eachUsing LaTeX and word – Accessingoverview of toolbarssaving filesUsing help and resourcesrulersformat painter in word. Task 2: Using LaTeX and Word to create a project certificate. Features to be covered:- Formatting Fonts in wordDrop Cap in wordApplying Text effectsUsing Character SpacingBorders and ColorsInserting Header and FooterUsing Date and Time option in both LaTeX. Task 3: Creating project abstract Features to be covered:-Formatting StylesInserting tableBullets and NumberingChanging Text DirectionCell alignmentFootnoteHyperlinkSymbolsSpell CheckTrack Changes. Task 4: Creating a Newsletter: Features to be covered:- Table of ContentNewspaper columnsImages from files and clipartDrawing toolbar and Word ArtFormatting ImagesTextboxesParagraphs and Mail Merge in word

Unit 5Excel Orientation0/21 topics doneAsk AI

The mentor needs to tell the importance of MS office or equivalent (FOSS) tool Excel as a Spreadsheet toolgive the details of the four tasks and features that would be covered in each. Using Excel – Accessingoverview of toolbarssaving excel filesUsing help and resources. Task 1: Creating a Scheduler - Features to be covered: GridlinesFormat CellsSummationauto fillFormatting Text Task 2 : Calculating GPA - .Features to be covered:- Cell ReferencingFormulae in excel – averagestd. deviationChartsRenaming and Inserting worksheetsHyper linkingCount functionLOOKUP/VLOOKUP Task 3: Split cellsfreeze panesgroup and outlineSortingBoolean and logical operatorsConditional formatting

Unit 6Powerpoint0/18 topics doneAsk AI

Task 1: Students will be working on basic power point utilities and tools which help them create basic powerpoint presentations. PPT OrientationSlide LayoutsInserting TextWord ArtFormatting TextBullets and NumberingAuto ShapesLines and Arrows in PowerPoint. Task 2: Interactive presentations - HyperlinksInserting –ImagesClip ArtAudioVideoObjectsTables and Charts. Task 3: Master Layouts (slide, template, and notes)Types of views (basic, presentation, slide slotter, notes etc), and Inserting – BackgroundtexturesDesign TemplatesHidden slides

Basic Electrical Engineering Lab (100106P) - 1 Credits

0L + 0T + 2P0/11 topics done

Perform any 10 Experiments1. Verification of Kirchhoff’s laws.2. Verification of Superposition Theorem.3. Verification of Thevenin’s Theorem.4. Verification of Norton’s Theorem.5. Verification of Maximum Power Transfer Theorem.6. Measurement of power in 3 – Ø circuit by Two Watt meter method and determination of its power factor.7. Star to Delta and Delta to Star conversion of the three circuit.8. Determination of Efficiency by load test of a 1 – Ø Transformer.9. To study the typical BHK house wiring10. Study of safety precautions while working on electrical installations and necessity of earthing

Semester 1

Theory

Practical

Ask AI

Support BEUConnect

Send feedback